800T 80″X36″,12″-18″ DL, 12″ STR, (8) 10″ CYLS, POWER UNIT, NEWMAN

MODEL: 480-800. SERIAL #14497. BURNT PLATE CONSTRUCTION. ACTUAL BED AND SLIDE AREA IS APPROX 94” L TO R X 40” F TO B. *PRESS IS SET UP WITH ELECTRICALLY HEATED PLATENS THAT RESULT IN A HEATED AREA OF 80” X 36”. TOTAL OF 6 HEAT ZONES. RATED TO APPROX 550F. TOTAL OF 84 CARTRIDE HEATERS (42 TOP AND 42 BOTTOM) THAT ARE APPROX 0.4375” DIAMETER (13 IN EACH LEFT & RIGHT ZONE; 16 IN CENTER ZONE). EIGHT (8) 10” BORE CYLINDERS WITH 6” DIAMETER RODS AND 12” MAX STROKE. MAX DAYLIGHT IS APPROX 12” WITH HEATED PLATENS; 18” WITHOUT. OPERATOR HEIGHT IS APPROX 39.5” WITH PLATENS; 37.75” WITHOUT. GEAR & RACK GUIDING. CONTROL SYSTEM INCLUDES: LARGE FUSED DISCONNECT; CONTROL CONSOLE WITH AN ALLEN-BRADLEY (AB) SLC 5/02 PLC; AB PANELVIEW 550; PALM BUTTONS; RESET AND E-STOP (22” X 26” X 40” TALL); SECONDARY CONTROL PEDESTAL FOR OPTIONAL SECOND OPERATOR WITH PALM BUTTONS AND AN E-STOP (24” X 12” X 45” TALL); 12” MINISAFE LIGHT CURTAINS FRONT & REAR (MS 4300); TEMPSONICS LINEAR TRANSDUCER; SIX (6) BARBER COLMAN TEMP CONTROLLERS (0-800F); AMPMETER; TWO (2) SAFETY-PULL WIRES; OPTIONAL 3-STAGE EMBOSSING CONTROLS WITH ADJUSTABLE PRESSURE; DEGAS; ETC… HYDRAULIC SYSTEM: TOP MOUNTED 50 GALLON PREFILL TANK; FLOOR STANDING 150 GAL TANK; 30 HP MOTOR (230/460V; 1800 RPM; DOUBLE-SHAFT); VICKERS 25V21A-1C-20-282 PUMP; VICKERS PVB10-RS4-31-CVP-12 PUMP; TOTAL OF 41.5 GPM; RATED TO 3000 PSI, HOWEVER PRESS SYSTEM REQUIRES APPROX 2550 PSI FOR 800 TONS; FANEX ¼ HP MODEL 15L AIR COOLER; VICKERS VALVES; RETURN FILTER; LOW/MED/HIGH PRESSURE ADJUSTMENT KNOBS. OVERALL DIMENSIONS OF PRESS APPROX 147” X 56” 148” TALL (HEIGHT REDUCED TO APPROX 130” BY REMOVING PREFILL TANK). WEIGHS APPROX 53,000 POUNDS. POWER UNIT IS APPROX 106” X 68” X 86” TALL. POWER UNIT AND PEDESTALS WEIGH APPROX 9,000 POUNDS (62,000 POUNDS APPROX OVERALL). SOME MANUALS AND DRAWINGS. ITEM #2269C.