250T 20″X20″. 6.5″ DAYLIGHT, 6″ STROKE, 50 GAL TANK, TMP

SKU: 2343 Category:

16” DIAMETER MAIN RAM WITH APPROX 6” STROKE. TWO SIDE CYLINDERS FOR FAST CLOSE (USING A PREFILL VALVE) AND OPEN THAT ARE: 2.5” BORE; 1.375” DIA ROD; 6.5” STROKE. DAYLIGHT IS APPROX 6.5”, 12.5” WITH HEATED PLATENS REMOVED. DISTANCE BETWEEN THE POSTS: 22” L TO R X 10” F TO B. OVERALL: 35” L TO R X 23” F TO B; HOWEVER THEY ARE SET UP WITH THE 20” X 20” ELECTRICALLY HEATED PLATENS. THE LOWER HEATED PLATEN CAN BE SHUTTLED IN AND OUT WITH A 1.5” BORE. 28” STROKE CYLINDER (TABLE ON FRONT OF PRESS). HEATED PLATENS ARE 20” X 20” X 2.5” EACH WITH TEN 0.5” CARTRIDGE HEATERS. PLATENS DIVIDED INTO 2 ZONES (2 HEATERS ON EACH SIDE ARE THE “OUTER ZONE”; 6 HEATERS MAKE UP THE “INNER ZONE”. EACH HEATER IS 1 KW AND 1.25 AMPS: 10 KW AND 12.5 AMPS PER HEATED PLATEN). FULLY GUIDED ON 5” DIA POSTS WITH 6” BUSHINGS. OPERATOR HEIGHT IS APPROX 39”; 35” WITHOUT PLATEN. HYDRAULIC POWER UNIT: 50 GALLON FLOOR-STANDING TANK; 7.5 HP MOTOR (208-230/460V; 1800 RPM); HYDURA PISTON PUMP PVW-06D-LDAY-CNT07 WITH A 5.3 GPM GEAR PUMP; WATER-TYPE COOLER; VALVES; 6.5 GALLON ACCUMULATOR; ETC… OVERALL DIMENSIONS OF PRESS APPROX: 40” L TO R X 86” F TO B INCLUDING SHUTTLE AND TABLE (48” WITHOUT) X 68” TALL. OVERALL DIMENSIONS OF HYDRULIC UNIT APPROX: 64” X 52” X 76” TALL. NO CONTROLS. APPROX 14,000 POUNDS. ITEM #2343.