520T 41”X33.5”, 21” RAM, 34.5” DL,19” STROKE, SLAB-SIDE

EEMCO. 42” CLEARANCE L TO R. CROWN IS 42” L TO R X 30” F TO B. NOMINAL BED IS 41” X 33.5”. MAIN RAM IS 21” DIAMETER WITH APPROX 16”-18” MAX STROKE. MAX DAYLIGHT IS APPROX 34.5”. PREFILL VALVE. TWO SIDE CYLINDERS: 3.25” BORE, 3000 PSI, 19” MAX STROKE, DOUBLE-ACTING. SLIDE IS GUIDED WITH 10” LONG, 45 DEGREE ADJUSTABLE GIBS. OPERATOR HEIGHT IS APPROX 48”. SLABS ARE 6.5” THICK. 14” WIDE WINDOW EACH SIDE CENTERED. TEN 5/8” DRILLED AND TAPPED HOLES IN BOTH CROWN AND BED. HYDRAULIC SYSTEM: 50 HP MOTOR (1800 RPM; 230/460 VOLTS – MACHINE IS WIRED FOR 460V); OILGEAR PUMP (PVWH-34-LSAY-CNSN); RACINE VALVES AND MANIFOLD; 200 GALLON RESERVOIR; OIL TEMP GAUGE; KIDNEY CIRCUIT WITH WATER COOLER AND FILTER (3 HP; 1800 RPM; 230/460V); PIPE TO CONNECT HYD UNIT ON LEFT SIDE OF PRESS; ETC… CONTROLS ON PRESS: PALM BUTTONS; 4 TEMP CONTROLLERS; E-STOP; ADJUSTABLE LIMIT SWITCHES; TONNAGE GAUGE; PRESSURE ADJUSTMENT. CONTROLS IN PANELS MOUNTED ON HYDRAULIC UNIT: FOUR TIMERS (CURE, BUMP DELAY, BUMP COUNTER, PUMP); PUMPS ON/OFF; MAN/AUTO; SIGNAL LIGHTS (DIRTY FILTER, HAND RELEASE, PUMP PRESSURE); ETC… OVERALL DIMENSIONS OF HYDRAULIC UNIT: 84” X 64” X 102” TALL; PRESS: 72” X 64” X 107” TALL. APPROX 27,500 POUNDS. ITEM #1861.