75T 20”X18.5”, 14”-22”ADJ DL, 12.25” STROKE, FRENCH OIL

SKU: 2292 Category:

MACHINE #21163. 25” L TO R OVERALL X 13.75” F TO B BETWEEN THE POSTS. NOMINAL BED IS 20” X 18.5” (NUTS UNDER THE CROWN REDUCE THE CLEARANCE TO 18.5” X 12.5”. A SPACER BLOCK COULD BE INSTALLED TO NEGATE THE REDUCTION). THERE IS A 13” X 2.75” NOTCH ON THE REAR OF THE SLIDE. CLAMP CYLINDER: DOUBLE-ACTING; 8” BORE; 3.5” DIAMETER ROD; RATED TO 3000 PSI; MAX STROKE OF 12.25”. DAYLIGHT IS ADJUSTABLE FROM APPROX 14” TO 22”. FULLY GUIDED WITH 6” BUSHINGS ON 1.75” DIAMETER POSTS. SUPERBOLT TIE-BAR NUTS. APPROX 43” OPERATOR HEIGHT. FORK POCKETS. PNEUMATIC SLIDING DOOR/GUARD ON FRONT (TWO 1.5” X 24” CYLINDERS); LEXAN GUARDING ON SIDES AND FRONT; 36” MICROGUARD LIGHT CURTAINS ON BACK. SOME DRILLED & TAPPED HOLES IN SLIDE AND CROWN. SELF-CONTAINED HYDRAULIC SYSTEM: (MISSING MOTOR AND PUMP), APPROX 20 GALLON TANK; HEAT EXCHANGER; RETURN FILTER; PROPORTIONAL TONNAGE ADJUSTMENT; TONNAGE GAUGE; APPROX SPEEDS: 160 IPM FAST CLOSE, 0-6 IPM PRESSING, 110 IPM FAST OPEN. CONTROLS: (NOTE: PLC, STARTER; DISCONNECT; ETC… ARE MISSING) ALLEN BRADLEY PANELVIEW 600 HMI; MAN/AUTO; CLOSE/OPEN; “PALM” BUTTONS; E-STOP; LINEAR TRANSDUCER; 480V/3PH SYSTEM; ETC… OVERALL DIMENSIONS APPROX 48” X 48” X 78” TALL. APPROX 5,000 POUNDS. ELECTRICAL AND HYDRAULIC PRINTS. #2292.